500VA 300WATT LINE UPS

500VA 300WATT LINE UPS

Product #: ADV-TC-SMT500RT1
Availability: IN STOCK
Add To List  

Main Features

  • Plug/Connector Type: NEMA 5-15P
  • Receptacles: 7 x NEMA 5-15R
  • Switching Time: 4 ms
  • Load Capacity (VA): 500 VA
  • Load Capacity (Watt): 300 W
  • Input Voltage: 120 V AC
  • Output Voltage: 120 V AC
  • Backup/Run Time (Full Load): 3.20 Minute
  • Maximum Battery Recharge Time: 4 Hour
  • Width: 17.5
  • Depth: 11.8
  • Rack Height: 1U
  • Form Factor: Tower/Rack Mountable
  • Weight (Approximate): 18.80 lb
  • Limited Warranty: 2 Year

Package Contents

    • SMART500RT1U UPS System
    • Mounting hardware
    • Cabling for USB & DB9 monitoring and EPO switching
    • PowerAlert unattended shutdown and UPS/Power monitoring software
    • Warranty information and instruction manual
Brand
Brand Name
Tripp Lite

Power Description
Filtering
EMI / RFI
Frequency
60 Hz
Input Voltage
120 V AC
Input Voltage Range
120 V AC
Load Capacity
500 VA/300 W
Output Voltage
120 V AC
Surge Energy Rating
480 J
Waveform Type
Pulse-width Modulated Sine Wave

Miscellaneous
Additional Information
    • SMART500RT1U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts, plus network-grade AC surge suppression
    • 500VA / 300 watt power handling capability compatibile with networking, telecom and other sensitive electronic devices
    • Supports 1U rackmount installation in 2 or 4 post rack enclosures, upright tower placement also supported - mounting accessories included
    • Large internal batteries offer runtimes of 17 minutes at half load (250VA / 150 watts) and 5 minutes at full load (500VA / 300 watts)
    • Maintains regulated 120V nominal output during brownouts as low as 90V
    • Includes 6 UPS-supported outlets, with one single outlet load bank that can be powered off and back on again via software interface. One additional surge-only outlet powers accessories not requiring battery support
    • PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
    • Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities
    • Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
    • Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices
    • Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
    • Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
    • Emergency Power Off (EPO) interface with cable
    • Multi-function audible alarms and set of 5 front panel LEDs
    • Network-grade AC surge suppression
    • Attractive all-black color scheme
    • UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
    • Two year warranty with $250,000 connected equipment insurance (USA & Canada only)
Package Contents
    • SMART500RT1U UPS System
    • Mounting hardware
    • Cabling for USB & DB9 monitoring and EPO switching
    • PowerAlert unattended shutdown and UPS/Power monitoring software
    • Warranty information and instruction manual
Software Included
PowerAlert Software
System Requirements
TYPICAL APPLCIATIONS:
Ideal for protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.

Physical Characteristics
Color
Black
Dimensions
17.5 Width x 11.8 Depth
Form Factor
Tower/Rack Mountable
Height
15.4
Length
5.3
Power Cord/Cable
10 ft
Weight (Approximate)
18.80 lb
Width
22.1

Warranty
Standard Warranty
2 Year

Controls/Indicators
Status Indicators
5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.

Interfaces/Ports
Interfaces/Ports
  • 1 x USB
  • 1 x DB-9 Serial
Modular Slots
4 x Communications Slot

Battery Information
Backup/Run Time
  • 0.08 Hour 500 VA Full Load
  • 0.28 Hour 250 VA Half Load
Batteries
Sealed Lead Acid User Replaceable Hot-swappable
Battery Life
6 Year
Battery Recharge Time
4 Hour

General Information
Manufacturer
Tripp Lite
Manufacturer Part Number
SMART500RT1U
Product Line
SmartPro
Product Type
Line-interactive UPS

Management
Alarm
  • Low Battery
  • On Battery
  • Overload
  • UPS Fault
Emergency Power OFF
Yes
Network Management
SNMP Manageable
Overload Protection
    • Via 15A input breaker

Technical Information
Plug/Connector Type
NEMA 5-15P
Receptacles
7 x NEMA 5-15R
Switching Time
4 ms

Environmental Conditions
Humidity
0 to 95% Non-condensing Relative Humidity
Temperature
122°F (50°C)